The above information would lead to selecting MG 690 because this product can be used on steel, stainless steel, Monel and Inconel. (The metals the part could be possibly made from.) It has a high tensile strength (up to 85,000 psi), and it will with stand high heat service. Alloys for Hi-Tensile Welding of All SteelsThe above information would lead to selecting MG 690 because this product can be used on steel, stainless steel, Monel and Inconel. (The metals the part could be possibly made from.) It has a high tensile strength (up to 85,000 psi), and it will with stand high heat service.
Drawbar springs are designed at safe stress levels at the compression springs solid height. One of the key features of the drawbar spring is that the springs are designed in such a way that the drawbars prevent buckling as they are being compressed. In addition, the drawbar spring has a hard stop at the compression springs solid height which Dendoff Spring Materials600 625 X-750 1.01 1.0006 1.0035 Stainless Steels High Carbon Spring Wire Material Tensile Properties Torsional Properties Maximum Operating Temperature Rockwell Hardness Method of High physicals. Monel 400 AMS 7233 145-180 [1000-1241] 26  40 9.5 [65.5] Dendoff Spring Materials600 625 X-750 1.01 1.0006 1.0035 Stainless Steels High Carbon Spring Wire Material Tensile Properties Torsional Properties Maximum Operating Temperature Rockwell Hardness Method of High physicals. Monel 400 AMS 7233 145-180 [1000-1241] 26  40 9.5 [65.5]
P/M high speed steel with high abrasion resistance and toughness for general use. Press forming dies for mass production, roll. P/M high speed steel with high hardness and highest abrasion resistance. Cold plastic working dies of long life, high performanced IC molds. 55-60 50-55 55-60 57-62 55-60 53-58 48-53 54-60 50-55 48-53 60-64 YXM1, HAP40 High Temperature Alloys, NITRONIC, INCONEL, HASTELLOYHigh strength fully Austenitic alloy that resists galling and wear. Significantly lower cost to extend part life and lower maintenance. The yield strength is twice that of 304 and 316 stainless steels, in the annealed condition. Tensile strengths can be produced in excess of 200 ksi. Inconel vs Stainless Steel:Which is Stronger?Inconel 625® has a higher tensile strength than grade 304 stainless steel, and does a better job of maintaining that strength at higher operating temperatures. Additionally, though the melting point of this particular type of Inconel is lower than that of 304 stainless
SAE 1070-1090 high carbon tempered spring steel is a standard material for spiral retaining rings and wave springs. Tensile strength and yield strength are maximized as a result of the oil tempered martensitic structure. Hard Drawn SAE 1060-1075 high carbon cold drawn spring steel is a standard material for snap rings. Hard drawn carbon steel Properties of common spring materials - ace wire spring Tensile Properties Modulus in Torsion G psi x 106 (MPa x 103) Max. Operating Temp. oF Max. Operating Temp. oC Rockwell hardness> Method of Manufacture Chief uses Special Properties Music Wire ASTM A 228 C 0.70-1.00% Mn 0.20-0.60% 230-399 (1586-2751) 30 (207) 45 11.5 (79.3) 250 121 C41-60 Cold drawn high and uniform tensile. High quality springs Suspension Springs - Mid-West Spring and StampingSuspension Springs High-performance suspension springs deliver winning results! Request a Quote In the demanding world of motorsports, quality coil suspension springs play a critical role. We may not be the biggest suspension spring supplier, but we are one of the best in the industry. Using primarily chrome vanadium or chrome silicon, every step of production 
Tensile / yield strengths and ductilities for some of the plain carbon and low alloy steels are given in the following mechanical properties of steel chart. Yield Strength, Tensile Strength and Ductility Values for Steels at Room Temperature:Material:Yield Strength:Tensile Strength % Elong. The Future Revolution in Automotive High Strength Tensile Strength (MPa) 0 10 20 30 40 50 60 70 0 600 1200 Low Strength Steels (<270MPa) Ultra High Strength Steels (>700MPa) 300 900 High Strength Steels 1600 D P, C P T R I P AHSS MART H S L A I F Mild IF-HS BH C Mn ISO Conventional HSS Formability of High Strength Steels WE ARE NOT LIMITED TO THE ABOVE - Precision Coil High tensile with good corrosion resistance. Operating temperatures up to 350°F. Stainless Steel - is most common spring alloy. Cobalt-Based and ability to withstand high temperatures. Nickel-Based Inconel X750, 718, 600 Ni-Span-C Hastelloy Monel ASTM-B-166 ASTM-B-197 AMS5698 AMS 5699
The nominal room-temperature tensile properties of MONEL alloy 400 are shown in Table 4. Additional data on hardness of various tempers of sheet and strip are in Table 5. Figures 2 and 3 are based on typical data that show relationships between properties of rods and forgings and sheet and strip. Short-time high-temperature properties of hot-rolled monel 400 fasteners, alloy 400 bolts suppliers,400 screws High Tensile Fastener nut and bolt, monel fastener 400 bolt nut FOB Price:US $0.0005-0.04 / Monel 400 Stud Bolt Fastener ManufacturersFOB Price:US $600-750 / Ton; Monel 400 UNS NO4400 2.4360 FasteningFOB Price:1000 Pieces (Min. Order) Monel 400 fastenerFOB Price:US $1-10 / Piece High Tensile Fasteners HT Nut Bolt M10 High Tensile High Tensile Bolt Material, M8 High Tensile Bolt Strength, Check Updated price List of High Tensile Steel Threaded Rod There are different grades such as 10.9, 8.8, DIN 933 and 12.9 grades. There are also many standards such as the IS1364, IS1363, DIN EN ISO 4014 and others.